€29.00
Op voorraad
piezo actuator AE0203D08 NEC 2mm x 3mm x 10mm
5 stuks
Operating temperature range
-25 to +85°C
When applied with a DC voltage: Ambient temperature
When driven by an AC voltage: Ambient temperature + Temperature rise due to generated heat
Recommended Storage condition -5 to +40°C / less than 40% R.H.
Recommended storage at room temperature. No condensation
Maximum driving voltage 150V DC
Displacement
9.1±1.5µm At 150V DC
Blocking force 200 N
Force required for restricting the displacement to 0 when the maximum driving voltage is applied.
Capacitance 0.18 µF ± 20%
f = 1kHz; V=1Vrms
Dissipation Factor
3.5 to 5.0%
f = 1kHz; V=1Vrms
Insulation Resistance
100 MOhm
Value obtained in 1 minute at 150V DC
Resonance Frequency
138 kHz
With both ends of the actuator in free state under standard factory conditions.
Tensile strength 1/10 of generated force Typical value of the element under standard factory tests conditions
Young′s Modulus
4.4×1010 N/m2
Typical value of the element under standard factory tests conditions
Temperature Cycle Test Displacement: Initial value ± 20%
Capacitance: Initial value ± 30%
Tan Delta: Less than initial rated value
Insulation resistance: 1MOhm or more
Apperance: No noticeable defect Room temperature (3 min)
-25°C (30 min)
Room temperature (3 min)
+85°C (30 min)
Repetition of 10 cycles of the above
piezo actuator AE0203D08 NEC 2mm x 3mm x 10mm
5 stuks
Operating temperature range
-25 to +85°C
Maximum driving voltage 150V DC
Displacement
9.1±1.5µm At 150V DC
Blocking force 200 N
Force required for restricting the displacement to 0 when the maximum driving voltage is applied.
Capacitance 0.18 µF ± 20%
f = 1kHz; V=1Vrms
Dissipation Factor
3.5 to 5.0%
f = 1kHz; V=1Vrms
Insulation Resistance
100 MOhm
Value obtained in 1 minute at 150V DC
Resonance Frequency
138 kHz
With both ends of the actuator in free state under standard factory conditions.
Tensile strength 1/10 of generated force Typical value of the element under standard factory tests conditions
Young’s Modulus
4.4×1010 N/m2
Typical value of the element under standard factory tests conditions
Gewicht | 0.200 kg |
---|
Beoordelingen
Er zijn nog geen beoordelingen.